Plate mount / satellite mount 2.0 inch x 3 foot L section

£41.50

Heavy duty welded and hot dip galvanised plate mount / satellite mount (do not confuse with seemingly similar products of pressed steel construction and inferior plated (or pre galvanised) finish).

Carriage charges. Unfortunately we cannot ship this product out of the UK.

Description

2.0 inch x 3 foot L section plate mount / satellite mount

A heavy duty plate mount in hot dip galvanised steel (finish may vary), do not confuse with inferior pre galvanised / plated pressed steel types

The “pole” is 2.0 inch diameter by 1.8mm wall thickness and the bottom plate (approx 7.5 in square, see dimensions on the product picture) is 5mm steel.

Recommended for any TV aerial or a satellite dish up to 1 metre.

Other plate mounts are available :
2in x 3ft straight plate mount
1.25in x 3ft L Section plate mount
Also see heavy duty flat roof mounting kit

Wall anchors (if required) are here :
Screws (50 & 75mm) with standard plugs / screws (50mm) with universal plugs / sleeve anchors

Pole mast diameters and wall thickness - gauge 577W L5

How strong are these plate mounts ?

1.25in plate mount on test (text) 500H L10

Carriage charges.

Pre galvanised and zinc plated, the less effective anti corrosion finishes 420W L5Hot dip galvanising v pre galvanised corrosion tests 350W L10