Plate mount / satellite mount 2 inch x 3 foot straight


Heavy duty welded and hot dip galvanised plate mount / satellite mount (do not confuse with seemingly similar products of pressed steel construction and inferior plated finish)


2 inch x 3ft straight patio / plate mount.

A heavy duty plate mount in hot dip galvanised steel, finish may vary.

The “pole” is 2 inch diameter by 2.0mm / 14 gauge wall thickness and the bottom plate (approx 10 in square, see dimensions on the product picture) is 5mm steel.

Recommended for any TV aerial or a satellite dish up to 1.0 metre.

Other plate mounts are available :
1.25in x 3ft L Section plate mount
2in x 3ft L Section plate mount
Also see heavy duty flat roof mounting kit

Keeper plates” to fit this plate mount are also available, useful when installing on metal or wooden skinned buildings.

Unfortunately a non conveyable carrier surcharge applies to this product.

Pole mast diameters and wall thickness - gauge 577W L5

How strong are these plate mounts ?

1.25in plate mount on test (text) 500H L10