Saddle/Sledge heavy duty 1.5″ to 2″ STAINLESS STEEL

£8.50

1.5″ to 2″ heavy duty stainless steel saddle (supplied individually).
They have slotted holes so will also fit the 1.5″ V bolts, but see further information in “Description”.

Carriage charges
Non UK orders ALWAYS incur a carriage surcharge, please contact us for a quote BEFORE ordering !

Category: Tag:

Description

2.0 inch stainless steel saddle / sledge, because they are slotted they will accept the 1.5″ and the 2″ V bolts, but for 1.5” poles see additional information at bottom of this section.

Made of 2.9mm A4 marine grade stainless steel.

The slots take a 10mm bolt.

Supplied individually.

Also see galvanised heavy duty saddles (2″, 2.5″, 3″, 3.5″ and 4″)

See use of saddle with V bolts.

2 inch stainless steel sledge 300H L5

This 2″ stainless saddle has slots (rather than holes) and can take both the 1.5″ and 2″ V bolts. Obviously if the pole is a 2″ you’d need 2″ V bolts. If the pole was a 1.25″ then 1.5″ V bolts would fit. The fly in the ointment is the 1.5″ pole, as the adjacent picture shows. Both the 1.5″ and 2″ V bolts fit, but the former are a bit short of thread and the latter have a surplus of thread ! However, being stainless steel, the V bolts can be can be cut down if required without any risk of rusting.

Our 2″ stainless saddles combined with our 2″ stainless V bolts are also suitable for clamping Renusol Variosole ground mounts to scaffold poles.

Carriage charges.