Clamp kit – heavy duty (galvanised sledges)


Heavy duty clamp kit available in 5 sizes and with plain or Nyloc (4 of 8) nuts.
The saddles are hot dip (or spun) galvanised. The threaded bar, nuts and washers are stainless steel. Normally be used in pairs.

Carriage charges.
Non UK orders ALWAYS incur a carriage surcharge, please contact us for a quote BEFORE ordering !

Clear selection
SKU: N/A Category: Tag:


Heavy Duty clamp kits.
Note : these clamps would normally be used in pairs.

The minimum diameter pole is 1″ on the 2.0″ and 2.5″ clamp kit, and 1.25″ on the 3.0″, 3.5″ and 4.0″ clamp kits.
The maximum diameter pole is dictated by the relevant size of the clamp kit.
Will only clamp parallel, not perpendicular.

The 2″ clamp is also available in all stainless steel

One kit comprises :
2 x 0.5m lengths of stainless studding
Four galvanised sledges (finish may vary)
One stainless M10 nut and washer pack (8 x nuts & 8 x washers)

The dimensions of the saddles :

These clamps are available with plain or Nyloc (4 of 8) nuts.

Nyloc nuts 578W L5

These clamp kits can be used in conjunction with our 20×20 box section alloy, e.g. :

Using 3.5in saddles and 20x20 box section to clamp a 2in pole to a 3in square section 302W L5

Carriage charges.




2.5 inch heavy duty parallel clamp kit 300W L5

Also see 2×2 clamps, and 3×3 clamps.