XB10K Aerial


The XB10K is the correct aerial for K group transmitters for sites in poor signal areas. Its relatively compact size (and the fact it can be end mounted) makes it particularly suitable for loft installs, though that’s rather a waste of its good build quality…..

Hard wired” dipole which is preferable for weather proofing….

Carriage charges. Non UK orders almost always incur a carriage surcharge.


Hard wired” dipole which is preferable for weather proofing….

The XB10 K is an alternative to the Yagi18K for poor areas of reception.
Although the XB10s have marginally more gain we normally recommend the grouped Yagi18s for outside installs because of their exceptional build quality. However, if you’re using the aerial in a loft it’s often a good idea to go for an XB10 because their smaller size enables more flexibility over where to install them within the roof space, furthermore they can also be end mounted (though we recommend cradle mounting the aerial for external installs). For an X Beam type these aerials are pretty strongly constructed, have a balun and come with a cradle and tilting clamp for poles up to 2in.

Due to wind loading considerations if fitting to a 10ft pole we advise using the 2” variety.

See aerial reports for the XB10K.

This aerial is particularly suitable for these K group transmitters.

The test performance and the dimensions and wind loading of the aerial  can be found in the tables below.

Also see other K group curves and relevant comparisons.

ATV aerial tests full results : our stock K group aerials v a typical Bacofoil XB10WB, all relative to a DM Log.

Carriage charges

Additional information


For poles up to 2in.


Comes supplied with cradle.