Description
Tile & Slate Mount
Neat way of installing a small (as in low wind loading) item on a pitched roof avoiding the need for long poles or large stand off brackets. Particularly suitable for hipped roof buildings and/or those without a chimney. Non-invasive installation, no drilling or lashing required. See article on the tile & slate mount.
The manufacturers say it`s been tested OK in a wind tunnel with a zone one dish though I`m not sure I`d fit anything that big…… I`d only fit a 50N wind load (or less) product.
NOTE : the supplied stub pole must not be extended.
Pre galvanised steel frame and alloy 1ft x 1.25” pole.
P&P is cheaper for this item if you phone the order through !
