Showing 13–24 of 25 results
-
£1.80
Insulation tape (Quality) : Black 33m reel
Decent quality “stretchy and sticky” insulation tape
-
£1.75 – £2.75
Nut and washer pack M10 STAINLESS (8 of each)
Pack of M10 stainless steel (A4 marine grade) nuts and washers (8 of each).
Also available with 4 Nyloc + 4 plain nuts and all Nyloc nuts. -
£0.75 – £2.50
Rope grips for catenary wire
Rope grips for catenary wire.
-
£0.65 – £7.45
Screws (50mm) with UNIVERSAL plugs
50mm wall screw with “Universal” wall plug These plugs are very good and usually work where conventional wallplugs won’t tighten due to the brickwork having voids in it or being particularly soft. The plugs also work in solid masonry, obviously. Thoroughly … Read More -
£0.50 – £7.50
Screws with standard plugs
M8 medium duty wall screws (50 & 75mm) and M10 nylon plugs (50mm & 80mm) Requires a 10mm hole on the masonry. The 50mm fixing has a SWL of about 45Kg (in concrete) though they should actually take double that … Read More -
£1.00 – £7.75
Self amalgamating tape (25mm wide)
Self amalgamating tape, 25mm wide (not the thinner 19mm stuff….).
Supplied by the foot or by the 10m reel -
£0.90 – £7.20
Sleeve anchors M8 x 75mm
This heavy duty wall anchor requires a 10mm hole in the masonry. It has a serrated flange nut (of adequate size for wall bracket fixing holes) and therefore does not need a separate washer. SWL is approx 300kG and recommended … Read More -
£0.75 – £2.50
Thimbles for catenary wire
Thimbles for catenary wire.
-
£0.55 – £3.75
Universal plug (50mm) NO SCREW
Universal plugs 10mm x 50mm (available with the screws here)
-
£1.50
Wing nut – die cast – M6 (pair of)
Non rusting M6 wing nuts with integral hexagon to fit a 10mm spanner.