Flat roof mounting kit (heavy duty)

£150.00

Heavy duty welded and hot dip galvanised flat roof mounting kit, supplied with stainless steel bolts, washers and Nyloc nuts.
This is a hot dip galvanised heavy duty mount with diagonal bracing. Do not confuse with lighter duty types of pressed steel construction and inferior plated finish.
A Starlink would sleeve neatly into this pole, or using a 2″ to 1.5″ pole coupler is even easier !

Carriage charges. Unfortunately we cannot economically ship this item out of the UK as it weighs 20Kg.

Description

Heavy duty flat roof mounting kit – approx 1m x 1m base. This product allows aerials and satellites etc to be installed on a flat roof without having to penetrate the latter and compromise its function (i.e. to keep water out….).
NOTE : We recommend placing a sheet of rubber (or similar) between the flat roof mount and the roof.

This is a heavy duty mount, do not confuse with lighter duty pressed steel / pre galvanised types.
Product has diagonal bracing from Jan 2023.

Frame is hot dip galvanised 3.5mm thick steel (finish may vary).
Pole is 3ft x 2in diam x 3.5mm wall thickness, i.e. it will never fail…..

Supplied with stainless steel bolts, washers and Nyloc nuts :

Nyloc nuts 578W L5

The internal diameter of the pole is about 40mm ( = approx the same as a scaffold pole) which may be significant if wanting to extend the pole by sleeving a 1.5″ mast inside it . More to the point a Starlink would sleeve neatly into this pole (if planning to do this we recommend reading the article on the link), though using a 2 inch to 1.5 inch pole coupler makes the job even easier ! Unfortunately neither method is really suitable for the “High Performance” dish because its lead cannot be routed down the inside of the pole…..:

The unit is designed to take 18” (45cm) square paving slabs (these may require rebating round the nuts).

Recommended for any TV aerial or a Starlink or a satellite dish up to 1 metre (with the supplied pole).

Carriage charges. Unfortunately we cannot economically ship this item out of the UK as it weighs 20Kg.

Pre galvanised and zinc plated, the less effective anti corrosion finishes 420W L5

Hot dip galvanising v pre galvanised corrosion tests 350W L10