2 inch x 1 inch pole clamp

Description

2“ x 1” pole clamp.

This product will only clamp perpendicular, not parallel.

Steel 2mm thick (av) / M8 thread.

Unfortunately this clamp is only available with Pre galv pressings and zinc plated bolts, however the 2×2 clamp is available in other finishes. Our M8 stainless wing nuts fit these clamps (and many others).

Maximum pole diameters as follows :

X = 1 to 2 inches

Y = 1 inch*

* 1.25 inch will go but is a very tight fit.

Minimum diameters :

X = 12mm (with 1” or more in Y)

Y = 10mm

Available with plain or Nyloc nuts.

Carriage charges.